Aerobic degradation by white‐rot fungi of trichloroethylene (TCE) and mixtures of TCE and perchloroethylene (PCE)

BACKGROUND: Trichloroethylene (TCE) and perchloroethylene (PCE) are considered among the most important groundwater pollutants around the world. These compounds are usually found together in polluted environments but little is known about the ability of microorganisms to simultaneously degrade TCE and PCE. RESULTS: Data showed that several species of white‐rot fungi, including Trametes versicolor, Ganoderma lucidum, and Irpex lacteus, degrade substantial levels of TCE in pure culture. T. versicolor was chosen for further study since it degraded higher levels of TCE than the other organisms. Initial glucose concentration and reoxygenation of samples increased the amount of TCE dechlorination, but no significant difference in percentage TCE degradation was observed. T. versicolor was able to degrade 34.1 and 47.7% of PCE and TCE added as mixtures (containing 5 and 10 mg L⁻¹, respectively). CONCLUSIONS: The degradation ability of TCE was extended to other species of white‐rot fungi. Percentage degradation as well as chloride release from mixtures of TCE and PCE showed that T. versicolor degrades mixtures of TCE and PCE almost as well as its ability to degrade individually added TCE or PCE. The results suggest the potential promise of T. versicolor for bioremediation of TCE and PCE in the environment. Copyright © 2008 Society of Chemical Industry     

The complex pathology of trinucleotide repeats

The expansion of trinucleotide repeat sequences has now been shown to be the underlying cause of at least ten human disorders. Unifying features among these diseases include the unstable behavior of the triplet repeat during germline transmission when the length of the repeat exceeds a critical value. However, the trinucleotide repeat disorders can be divided into two distinct groups. Type I disorders involve the expansion of CAG repeats, which encode an expanded polyglutamine, inserted into the open-reading frame of a gene that is usually quite broadly expressed. Recently, mouse models for type I disorders have been developed and the basis of pathology is under study, both in these models and through biochemical and cell biological approaches. The type II disorders involve repeat expansions in noncoding regions of genes. The mechanisms by which these repeat expansions lead to pathology may be quite diverse.     

Recent investigations on some cubic Laves phase compounds of rare earth and transition metals

Pseudobinary alloy, Tb_0·27Dy_0·73Fe_2−δ , belonging to C-15 cubic Laves phase having MgCu₂-type structure, possesses large magnetostriction and high magnetomechanical coupling coefficient. The advantages of this material over existing piezoelectric materials, particularly for SONAR applications, are highlighted. Recent results on the influence of cobalt (Co) on magnetic and magnetomechanical properties of Tb_0·27Dy_0·73Fe₂ are discussed.     

Fast RCS computation over a frequency band using method of momentsin conjunction with asymptotic waveform evaluation technique

The method of moments (MoM) in conjunction with the asymptotic waveform evaluation (AWE) technique is applied to obtain the radar cross section (RCS) of an arbitrarily shaped three-dimensional (3-D) perfect electric conductor (PEC) body over a frequency band. The electric field integral equation (EFIE) is solved using the MoM to obtain the equivalent surface current on the PEC body. In the AWE technique, the equivalent surface current is expanded in a Taylor's series around a frequency in the desired frequency band. The Taylor series coefficients are then matched via the Pade approximation to a rational function. Using the rational function, the surface current is obtained at any frequency within the frequency range, which is in turn used to calculate the RCS of the 3-D PEC body. A rational function approximation is also obtained using the model-based parameter estimation (MBPE) method and compared with the Pade approximation. Numerical results for a square plate, a cube, and a sphere are presented over a frequency bandwidth. Good agreement between the AWE and the exact solution over the bandwidth is observed     

In situ synthesis of TiC-Al (Ti) nanocomposite powders by thermal plasma technology

A novel processing technology was developed to investigate in situ synthesis of TiC-Al (Ti) nanocomposite powders by thermal plasma technology. Thermodynamic analysis was performed to predict possible starting materials and synthesizing conditions of TiC-Al (Ti) nanocomposite powders. A mathematical model was developed to describe temperature profile and velocity distribution in the reactor. The model is applied to optimize feeding rate, input power, and other processing parameters of TiC-Al (Ti) nanocomposite powders by thermal plasma technology, and to predict which materials can be used as starting materials. This paper emphasizes the investigation of the effect of feeding rate, input power, mole ratio, and other process parameters on synthesis of TiC-Al (Ti) nanocomposite powders by thermal plasma technology. The experimental results showed that TiC-Al (Ti) nanocomposite powders can be synthesized in situ by thermal plasma technology, and the average size of TiC-Al (Ti) nanocomposite powders was less than 100 nm.     

The role of apoptosis in the modulation of colon carcinogenesis by dietary fat and by the organoselenium compound 1,4-phenylenebis(methylene)selenocyanate

Studies in laboratory animals have demonstrated that dietary supplements of organoselenium, 1,4-phenylenebis(methylene)selenocyanate (p-XSC) inhibit colon carcinogenesis. Diverse chemopreventive agents and clinically used anticancer drugs have been shown to induce apoptosis in colonic tumors. Inducing apoptosis is a key mechanism for the effectiveness of some chemopreventive agents; however, failure of apoptosis is now believed to contribute to the development of human cancer. In this study, we determined the number of apoptotic bodies in the colon tumors of rats fed a low-fat (LF) or a high-fat (HF) diet with or without p-XSC treatment. At 5 weeks of age, male F344 rats were divided into four groups, which were then maintained on one of the following diets: LF, 5% corn oil; HF, 23.5% corn oil; and LF and HF supplemented with 20 ppm p-XSC. In addition, the LF or HF diet with p-XSC supplements was administered either during the initiation stage or postinitiation. At 7 weeks of age, all rats except those intended for vehicle (normal saline) treatment were given 15 mg/kg of body weight of azoxymethane once weekly for 2 weeks. The animals were sacrificed 38 weeks after carcinogen treatment, and their colonic tumors were examined for appearance of apoptosis. The LF diet significantly increased the percentage of apoptosis as compared to the HF diet; the percentage of apoptosis in LF and HF diets were 12.4 and 2.9. The colon tumors that were present in the groups fed p-XSC together with a LF or a HF diet after carcinogen administration (postinitiation period) had a higher number of apoptotic bodies than those that were present in the animals fed p-XSC before carcinogen treatment (initiation period). The extent of apoptosis was weak when p-XSC was given with a HF diet (4.4%) during the initiation phase, but it was high significant when p-XSC was administered with LF diet (25.2%). Taken together, our data suggest that administration of LF diet supplemented with p-XSC increases apoptosis as compared to a HF diet alone.     

A MEMS-Based Evaluation of the Mechanical Properties of Metallic Thin Films

Characterizing the mechanical properties of metal thin films is critical for the design and fabrication of metal microelectromechanical systems and integrated circuit devices. This paper focuses on wafer-level determination of the mechanical behavior of sputtered aluminum and nickel thin films, using a variety of measurement techniques. Elastic moduli have been determined in devices fabricated with standard micromachining techniques using bulge testing of square diaphragms and lateral resonator structures. We find a Young's modulus of ~70 GPa for Al and ~200 GPa for Ni, in agreement with data for the bulk metals. Using pressurize/depressurize cycles, the load-deflection curves of the membranes have also been determined, and in conjunction with finite element simulations, were used to determine the yield strength and fracture strength of these films. Residual stresses in the films have also been investigated using wafer curvature, bulge testing, and X-ray diffraction. The merits of each measurement technique are discussed.     

Red emission from Eu3+: PVA polymer film

Bright red luminescent Eu³⁺ doped polyvinyl alcohol (PVA) films were made by solution casting technique. The emission performance of these films was studied from the measurement of excitation, emission, and lifetimes. On irradiation with an UV source, the doped films emitted bright red light. Such luminescent polymer films are expected to find potential applications as new optical materials. Emission process in the system was explained by an energy level scheme. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3273–3276, 2006